宁波环甬润保涂层科技有限公司是一家以科技见长的公司,团队博士占比27%。发表数十篇论文,以下仅列创始人曹均博士24篇论文。
[1] Jun Cao *, Haibo Huang, Shuxin Li, Xiaocheng Wu, Zhongwei Yin, Zeshan Abbas, Tribological and Mechanical Behaviors of Engine Bearing with CuSn10 Layer and h-BN/ Graphite Coating Prepared by Spraying under Different Temperatures, Tribology International, 2020, 106445. (1区TOP)
[2] Qingyuan Gao, Shuxin Li, Yunshuai Su, Jun Cao, Oleksandr Moliar, Grain coarsening of nano laminated structure in martensite steel under sliding wear, Tribology International, 2020, 151:106381.(1区TOP)
[3] Xiuli Zhang, Zhongwei Yin, Qin Dong, Jun Cao, Experimental comparison of the seizure loads of gray iron journal bearing and aluminum alloy journal bearing under aligned and misaligned conditions, 2020, Mechanics and Industry 21(4):408 DOI: 10.1051/meca/2020038.
[4] Jun Cao *, Liang Qin, Aibing Yu, Haibo Huang, Guoping Li, Zhongwei Yin, Huiyu Zhou, A Review of surface treatments for sliding bearings used at different temperature, Friction, Lubrication and Wear, Chapter, 2019.
[5] Wehuang Liu, Jun Cao, He Tao, Gengyuan Gao, Hulin Li, Zhongwei Yin, Optimum cutting depth and spacing of roadheader picks: A numerical simulation using a 3D cracking method, Transactions- Canadian Society for Mechanical Engineering, 2019, 43(3):366-375.
[6] Xinbo Wang, Yafei Zhang, Zhongwei Yin, Yanjie Su, Yanping Zhang, Jun Cao,. Experimental research on tribological properties of liquid phase exfoliated graphene as an additive in SAE 10W-30 lubricating oil, Tribology International, 2019, 135: 29-37. (1区TOP)
[7] Xinbo Wang, Zhongwei Yin, Hulin Li, Gengyuan Gao, Jun Cao, Experimental comparison of CuAl10Fe3 journal bearings sliding against two different coatings, Industrial Lubrication and Tribology, 2019,71(7): 956-964.
[8] Jun Cao*, Zhongwei Yin, Hulin Li, Gengyuan Gao, Xiuli Zhang, Tribological and Mechanical Properties of Ti2AlC Coating at Room Temperature and 800 ℃,Ceramics International, 2018, 44 (1)1046-1051. (1区TOP)
[9] Jun Cao, Zhongwei Yin Designs of low frictional coefficients for joint bearings by inlaying graphites and liquid spraying of MoS2,Industrial Lubrication and Tribology, 2018, 70(9):1630-1635.
[10] Jun Cao, Zhongwei Yin, Hulin Li, Gengyuan Gao, Tribological studies of soft and hard alternated composite coatings with different layer thicknesses, Tribology International, 2017, 110: 326-332. (1区TOP)
[11] Jun Cao, Zhongwei Yin, Cuiyu Qing, Hulin Li, Gengyuan Gao, Xinbo Wang, Design and analysis of a self-lubricating nuclear joint bearing above 320°C,Industrial Lubrication and Tribology, 2017, 69(2): 95-104.
[12] Jun Cao, Zhongwei Yin*, Hulin Li, Gengyuan Gao, Research progresses and suggestions of manufacturing technologies of engine bearing bushes, IOP Conference Series: Materials Science and Engineering, 2017, 272(1): 012005.
[13] Jun Cao *, Zhijin Gao, Dongcheng Wei, Design of an intelligent tracking system for solar cells, Proceedings of Institution of Civil Engineers-Energy, 2014,(167):67-73.
[14] 王平,叶晓苇,曹均. 高温核用自润滑关节轴承设计及分析[J],轴承,2017:,10:19-22.
[15] 高刚毅, 曹均. 汽车活塞用WS2/Sb2O3涂料涂层摩擦性能及仿真[J], 涂料工业. 2017,47(05):34-37.
[16] 高刚毅, 曹均.二级行星轮系第二级太阳轮ADAMS几种仿真研究[J], 煤炭技术. 2016,35(04): 306-308.
[17] 叶锦宗, 李锦棒, 周宁宁, 曹均, 卿涛, 蒋世宇, 于爱兵, 成型工艺对多孔PI材料摩擦学及力学性能的影响[J], 材料工程. 2020,48(09): 144-151.
[18] 吴烨卿, 谢懿, 高海生, 祝生祥,文静波, 曹均, 洪松, 内燃机轴瓦涂层的研究现状[J], 机械制造. 2020,58(08): 1-5.
[19] 吴兆波, 邓琰, 黄焜安, 齐斌, 劳静文, 余丰, 曹均. 重力发电应用技术研究综述[J], 通信电源技术. 2020,37(06): 55-59.
[20] 曹均, 祝生祥, 王建荣, 高海生, 祝伟青. 内燃机轴瓦喷涂工艺及检测方法研究[J], 机械工程与自动化. 2019,(03): 148-153.
[21] 曹均, 王义亮, 杨兆建. 二级行星轮系第二级太阳轮联合仿真研究[J], 中国农机化学报. 2015,36(04): 48-51.
[22] 曹均, 王义亮. 横轴式掘进机截齿排列设计[J], 煤矿机械. 2013,34(04): 39-40.
[23] 曹均, 王义亮. 一种可转变为救生梯的普通阳台护栏[J], 机械工程与自动化. 2012,(06): 102-103.
[24] 曹均, 王义亮.基于ANSYS的采煤机行星齿轮组参数化建模与分析[J],制造业自动, 2013,10:89-90.